English
Español| Tread Width “B” mm/In | Tread Lenght “A” mm/In |
|---|---|
| 157 / 6 3/16 | 64 / 2 1/2 |
| 187 / 7 3/8 | 114 / 4 1/2 |
| 218 / 8 9/16 | 114 / 4 1/2 |
| 248 / 9 3/4 | 178 / 7 |
| 278 / 10 15/16 | 178 / 7 |
| 308 / 12 1/8 | 178 / 7 |
SCHEMATIC DIAGRAM OF THE PELDAÑO
The ACEROGRILL steps are manufactured with grids type G1. Special sizes and finishes can be manufactured at the customer's request.
LONG PERMISSIBLE FOR THE PELDAÑOS
| A = PORTLET PLATE | B = MAXIMUM LENGTH LENGTH | |
|---|---|---|
| Lisa (mm) | Gear (mm) | |
| 3/4" x 3/16" | 660 mm | ---------- |
| 1" x 3/16" | 910 mm | 760 mm |
| 1-1/4" x 3/16" | 1215 mm | 1040 mm |
| 1-1/2" x 3/16" | 1600 mm | 1395 mm |
"The maximum length of the steps is based on a concentrated load of 270 Kg applied in the center line of the step and distributed over the diametrical sheet and 4 bearing plates"
For special loading conditions our engineering department should be consulted.
HOW TO ORDER?
You should provide us the following information:- Grating mesh
- Quantities of pieces for cover your order
- Tread length and width
- Bearing bars surface finished (serrated or smooth)
- Finished (bare black or hot dip galvanized)