Propiedades :

  • Dimensions
  • CHEMICAL COMPOSITION
  • MECHANICAL PROPERTIES
  • QUALITY STANDARDS
QualityThicknessMeasures Width x LengthTheoretical Weight
Caliber N °(mm)(mm x mm)(kg/m2)(kg / sheet)
A366290,351.000 x 2.0002,8185,635
0,381.000 x 2.0003,0596,118
260,451.000 x 2.0003,6237,245
1.200 x 2.4003,62310,433
240,601.000 x 2.0004,8309,660
1.200 x 2.4004,83013,910
230,701.000 x 2.0005,36511,270
1.200 x 2.4005,63516,229
220,751.000 x 2.0006,03812,075
1.200 x 2.4006,03817,388
210,801.000 x 2.0006,44012,880
1.200 x 2.4006,44018,547
200,901.000 x 2.0007,24514,490
1.200 x 2.4007,24520,866
191,101.000 x 2.0008,85517,710
1.200 x 2.4008,85525,502
181,201.000 x 2.0009,66019,320
1.200 x 2.4009,66027,821
171,401.000 x 2.00011,27022,540
1.200 x 2.40011,27032,458
161,501.000 x 2.00012,07524,150
1.200 x 2.40012,07534,776
141,901.000 x 2.00015,29530,590
1.200 x 2.40015,29544,050
A619230,701.200 x 2.4005,63516,229
200,901.200 x 2.4007,24520,866
181,201.200 x 2.4009,66027,821
161,501.200 x 2.40012,07534,776
141,901.200 x 2.40015,29544,050
A620230,701.200 x 2.4005,63516,229
200,901.200 x 2.4007,24520,866
181,201.200 x 2.4009,66027,821
161,501.200 x 2.40012,07534,776
141,901.200 x 2.40015,29544,050
 Original coils with a weight of 16 to 14 tons.We offer our Service Center:
  • Coils reduced to required weight.
  • Coils cut into strips with a minimum width of 20 mm.
  • Sheets in widths and lengths required.
  • Other requirements per order, please consult.
CHEMICAL ANALYSIS (%) MAXIMUM VALUES
RuleCMnPSSiCuNiCrMoVTiNbAlB
A-3660,120,550,020,0250,10,20,150,10,040,0080,0080,0080,08--
A-6190,070,450,0150,0150,050,120,10,10,040,0080,020,0080,08--
A-6200,060,30,0150,0180,050,060,040,050,040,0080,020,0080,08--
RuleEfforts (Mpa)A%Hardness (HRB)Bent 180 °
FluenceMaximum
A-366280 max270 a 41028 mín60 máx0e
A-619---------55 máx---
A-620280 máx270 a 41028 mín50 máx---
RuleDescription and Uses
Commercial Quality ASTM A-366This specification covers carbon steel coils and sheets, Commercial quality cold rolled. This material is recommended for both exposed and protected pieces, where prints and Moderate deformations in addition to welds can be involved.
ASTM A – 569This specification covers coils and cut sheets of steel, with low carbon content less than 15%, hot rolled commercial quality This material is used in pieces where they can be involved bending, stamping and deformation process.
Stamped Quality ASTM A-619This specification covers carbon steel coils and sheets, cold rolled quality stamping. It is recommended in the manufacture of pieces where deformations and severe prints (deep sausage) are present.
ASTM A-620This specification covers carbon steel coils and sheets, quality cold rolled Stamping, special calming. It is recommended in the manufacture of pieces where deformations and particularly severe prints (extra deep sausage), or where a surface free of wrinkles is required.
ASTM A-621This specification covers bonines and carbon steel sheets, hot rolled quality stamping. It is recommended in the manufacture of pieces where deformations and severe prints (deep sausage) and where the superficial appearance is not paramount.
ASTM -622This specification covers carbon steel coils and sheets, Hot rolled quality Stamping, special calming. It is recommended in the manufacture of pieces where deformations and particularly severe prints (extra deep sausage).
Structural Quality ASTM A-36This specification covers steel profiles, sheets and bars carbon structural quality to be welded, riveted or bolted in the construction of bridges and buildings, and for structural purposes.
ASTM A-283 GRADE CThis specification covers quality carbon steel sheets structural for general applications.
ASTM A-572 GRADE 50This specification covers high strength structural steels and low cobaltovanadium alloy, recommended for construction riveted, bolted or welded bridges, buildings and other structures.
Naval Quality ASTM A-131 GRADE AThis specification covers profiles, sheets, bars and rivets mostly used for naval constructions.
Quality for Pressure Vessels ASTM A-516 B GRADE 70This specification covers carbon steel sheets for the manufacture of welded containers, which must work under pressure and where a good tenacity is important.